Yamaha RX-Z11 User Manual

Use this feature to reassign digital input/outputs, select the input 
signal, rename the inputs, or adjust the level of the signal input at 
each input source.

• Some parameters described above may not be available for all input 

sources and some parameters are only available for specific input sources.

• You can set “Volume Trim” for each sub input source separately.
• The “Play Style” setting is effective to both “PC/MCX” and “USB”.

■ Station Search (U.S.A. model only)

Use this feature to select the preset HD Radio stations by the name 
of the stations. See page 72 for details.

■ I/O Assignment 

Use this feature to assign the input/output jacks according to the 
component to be used if the initial settings of this unit do not 
correspond to your needs. Change the following parameters to 
reassign the respective jacks and effectively connect more 
components.
Once the input/output jacks are reassigned, you can select the 
corresponding component by using the DINPUT selector (or the 
input selector buttons(3)).

Select “Input Select” in the GUI menu and then select 
“VCR”.

Select “I/O Assignment” and then “Coaxial Input”. 

Select “5CD”.

Select “Input Select” and then select the desired 
input source (“DVD”, etc.).

Select “I/O Assignment” and then select the desired 
jack assignment (“Coaxial Input”, “Optical Input”, 
“Optical Output”, “Analog I/O” “Component Video”, 
or “HDMI”).

Select “None” and then press 9

ENTER to clear the 

• “None” appears in the GUI when any input source is not assigned to the 

input/output jack.

• You cannot select a specific item more than once for the same type of jack.
• When you connect a component to both the COAXIAL and OPTICAL 

jacks, priority is given to signals input at the COAXIAL jack.

XM
(U.S.A. and 
Canada models 
only)

—

HD Radio (U.S.A. 
model only)

Station Search 
(U.S.A. model only)
Volume Trim
Rename

TUNER (U.S.A. 
model only)

—

—

—

—