Hotpoint FDF-780 User Manual

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the

water supply in the event of anomalies or leaks from

inside the appliance.

Some models are also equipped with the

supplementary safety device New Acqua Stop*,

which guarantees anti-flooding protection even in the

event of a supply hose rupture.

Only available in selected models.

Sink Waste System

For under sink drainage:

before connecting the drain hose, remove any

internal restrictions; this will prevent a build up of

debris which could cause a blockage

remove any restrictions from the waste spigot and

ensure that the sealing bung is removed

the hose should be routed, such that it is raised

to a minimum height of 800mm (31/2).

Ensure the sink outlet pipe has a minimum

diamtere of 32mm.

Untie the end of the GREY drainage hose from

the rear of the appliance.

Reposition the Hooked End Support as required

along the GREY drainage hose.

If fitting an under sink

waste disposal unit, cut

out the membrane, bung

or blanking plug.

Ensure the drain hose is securely attached, to

prevent it coming away while the machine is in

use and causing a flood.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose

be cut as it contains live electrical parts.

The Company shall not be held responsible for

any incidents that occur if these regulations are not

observed.