KitchenAid KUDS01IJ User Manual

1. Grasp the tip of the tine that is in the tine holder.

2. Gently push the tine out of the holder.

3. Lay the tines down, toward the center of the rack.

The light-item clips hold lightweight plastic items like cups, lids, 
or bowls in place during washing. 

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

You can raise or lower the top rack to fit tall items in either the top 
or bottom rack. Raise the top rack to accommodate items up to 
9 in (23 cm) in the top rack and 13 in (33 cm) in the bottom rack, 
or lower the top rack to accommodate items up to 11 in (28 cm) 
in both the top and bottom racks. Adjusters are located on each 
side of the top rack.

Lift the rack on either, or both, sides until the rack is level.

NOTE: The top rack adjusters MUST be level. 

Press both rack adjusters and slide the rack back to its 
original position.

The bottom rack is designed for plates, pans, casseroles, and 
utensils. Many items, up to 13 in (33 cm) tall, fit in the bottom 
rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the 
drawings shown. 

■

Do not load glasses, cups, or plastic items in the bottom 
rack. Load small items in the bottom rack only if they are 
secured in place.

■

Load plates, soup bowls, etc., between tines.

■

Overlap the edges of plates for large loads.

■

Load soup, cereal, and serving bowls in the rack in a variety 
of ways depending upon their size and shape. Load bowls 
securely between the rows of tines. Do not nest bowls 
because the spray will not reach all surfaces.