3com 206380-A User Manual
Installation and Reference for the BayStack 22 PC Card Adapter
B-4
206380-A
S10, S10FD, S100, S100FD Parameters
The S10, S10FD, S100, S100FD parameters specify the connection type of the
BayStack 22 network card. The connection type includes transmission speed
(10 or 100 Mb/s) and full- or half-duplex operation. These parameters are
mutually exclusive; you can select only one parameter at a time from the
command line. If you do not select any of these parameters, the default connection
type is autonegotiation.
BayStack 22 network card. The connection type includes transmission speed
(10 or 100 Mb/s) and full- or half-duplex operation. These parameters are
mutually exclusive; you can select only one parameter at a time from the
command line. If you do not select any of these parameters, the default connection
type is autonegotiation.
describes each parameter.
The following is an example of a connection type parameter set to 10 Mb/s
transmission speed and full-duplex mode:
transmission speed and full-duplex mode:
LOAD B22LAN10 INT=3 PORT=300 FRAME=ETHERNET_802.2 S10FD
Novell NetWare Client Files
This section provides information about client and NET.CFG files.
Client Files
briefly describes the files you use when installing the BayStack 22
network driver into your Novell NetWare client.
Table B-2.
Server Connection Type Parameters
Parameter
Connection Type
S10
10 Mb/s, half-duplex
S10FD
10 Mb/s, full-duplex
S100
100 Mb/s, half-duplex
S100FD
100 Mb/s, full-duplex
Table B-3.
Client Files
Command
Description
LSL.COM
Supports the OSI link support layer
B22ODI10.COM
Client BayStack 22 network driver
file
IPXODI.COM
Default protocol stack
NETX.EXE
Server connection
NET.CFG
Optional configuration file