Bosch SHE5AL User Manual

Page of 21
15
2.  return the locking nut to its installed position and turn it 1/8 turn clockwise.
3.  return the top rack to the top rack roller guides.
To remove the bottom spray arm:
1.  remove the empty bottom rack from the dishwasher tub.
2.  Grasp and lift the bottom spray arm  as shown in figure 19.
3.  look for obstruction in the spray nozzles.
4.  If the spray nozzles need cleaning, flush them under running water. 
To reinstall the bottom spray arm:
1.  return  the  bottom  spray  arm  to  its  installed  position  and  press  it  so  that  it  snaps  into 
place.
2.  return the bottom rack to its installed position.
Check/Clean the Filter System
This dishwasher has a filter system that consists of a Large Object Trap/Cylinder Filter assembly 
and a Fine Filter. Select models have an additional Micro Filter. The filter system is located on the 
inside of your dishwasher under the lower rack and is easily accessible.
During normal use, the filter system is self-cleaning. You should occasionally inspect it for foreign 
objects and clean it when necessary.
 
CAUTION
 
 
To avoid injury, do not reach into the large object trap with your fingers. The large object 
trap could contain sharp objects. 
To Remove the Large Object Trap/Cylinder Filter Assembly:
1.  remove the bottom rack.
2.  Grasp the assembly as shown in figure 20 and turn it counter clockwise 1/4 turn.
3.  lift out the assembly as shown in figure 21 and 22. 
4.  Carefully examine the assembly. If you find debris in the Large Object Trap, turn it upside-down 
and gently tap it on a surface such as a countertop to dislodge and remove the debris. flush 
the Cylinder filter clean by holding it under running water. place parts back in unit and lock 
as shown in figure 23.
Figure 21
Figure 20
Figure 22
Figure 23
large object trap
Fine
Filter
to open - turn counterclockwise.
to close - turn clockwise.