Bosch 119 User Manual

• If using a solder joint instead of a com-

pression fitting,

 be sure to make all

solder connections before connecting

the water line to the dishwasher.

• Make sure there are no sharp bends or

kinks in the water line which might

restrict water flow.

• When connecting threaded pipe use pipe

thread compound or Teflon tape to seal

the connection.

• Before connecting the copper hot water

supply line to the dishwasher, it should

be flushed with hot water to clear any

foreign material.

• Apply Teflon tape or other pipe sealant

to 90° elbow fitting and connect

directly to water inlet valve*.

• Turn on the water supply to check for

leaks after making connections.

Shut off valve

(not included)

DO NOT SOLDER WITHIN 6 INCHES

(152.4 MM) OF THE DISHWASHER’S

INLET VALVE.

TEMPERATURES REQUIRED FOR

SOLDERING WILL DAMAGE THE

VALVE!

*  Water inlet valve located at the bottom

left front of the dishwasher.