Blomberg DW 57500 SS User Manual
3
USA
2. INSTALLATION
WARNING
When installing the dishwasher, follow
basic precautions, including the
following:
basic precautions, including the
following:
The dishwasher installation must be
•
performed in accordance with the
installation manual. If you did not receive
an installation manual order it by calling
1-800-459-9848 or you may also download
it from our web site at
installation manual. If you did not receive
an installation manual order it by calling
1-800-459-9848 or you may also download
it from our web site at
www.blombergappliances.com
Installation, maintenance and repair should
•
be performed by a qualified installer. Work
by unqualified persons could be dangerous
and may void the warranty.
Do not operate the appliance if damaged,
by unqualified persons could be dangerous
and may void the warranty.
Do not operate the appliance if damaged,
•
malfunctioning, partially disassembled or if
it has missing or broken parts.
Before installation or service, disconnect
it has missing or broken parts.
Before installation or service, disconnect
•
the power supply to the work area by
unplugging the unit, “tripping” the circuit
breaker or removing the fuse.
Only connect the dishwasher to the power
unplugging the unit, “tripping” the circuit
breaker or removing the fuse.
Only connect the dishwasher to the power
•
supply when all installation and plumbing
work is complete.
Do not install or store the dishwasher
work is complete.
Do not install or store the dishwasher
•
where it can be exposed to below freezing
temperatures or exposed to weather.
Dishwasher must be secured to adjacent
temperatures or exposed to weather.
Dishwasher must be secured to adjacent
•
cabinetry using the brackets provided.
Failure to do this may cause damage to
property or bodily injury.
Connect to a properly rated, protected
Failure to do this may cause damage to
property or bodily injury.
Connect to a properly rated, protected
•
and sized power supply circuit to avoid
electrical overload. The dishwasher is
designed for an electrical supply of 120 V
(volts), 60 Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded
electrical circuit with a fuse or breakers
rated for 15 amperes. Electrical supply
conductors shall be a minimum of # 16
AWG copper wire rated at 75 °C (167 °F)
or higher. These requirements must be met
to prevent injury and machine damage.
Consult a qualified electrician if in doubt.
Do not use any extension cord or portable
electrical overload. The dishwasher is
designed for an electrical supply of 120 V
(volts), 60 Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded
electrical circuit with a fuse or breakers
rated for 15 amperes. Electrical supply
conductors shall be a minimum of # 16
AWG copper wire rated at 75 °C (167 °F)
or higher. These requirements must be met
to prevent injury and machine damage.
Consult a qualified electrician if in doubt.
Do not use any extension cord or portable
•
outlet device to connect the dishwasher to
a power supply.
a power supply.
WARNING
Danger of suffocation!
Ensure that any plastic wrappings, bags,
small pieces etc. are disposed of safely
and kept out of the reach of children.
Ensure that any plastic wrappings, bags,
small pieces etc. are disposed of safely
and kept out of the reach of children.
Remove the door to the washing
•
compartment when removing an old
dishwasher from service or discarding it.
Ensure that the appliance presents no
danger to children while being stored for
disposal.
Old appliances may contain materials
dishwasher from service or discarding it.
Ensure that the appliance presents no
danger to children while being stored for
disposal.
Old appliances may contain materials
•
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
your local recycling authority about the
possibility of recycling these materials.