Blomberg DWS 54100 FBI User Manual

2

USA

•  Dishwasher must be secured to adjacent 

cabinetry using the brackets provided. 

Failure to do this may cause damage to 

property or bodily injury.

•  Connect to a properly rated, protected 

and sized power supply circuit to avoid 

electrical overload. The dishwasher is 

designed for an electrical supply of 120 V 

(volts), 60 Hz (hertz), AC, connected to a 

dishwasher-dedicated, properly grounded 

electrical circuit with a fuse or breakers 

rated for 15 amperes. Electrical supply 

conductors shall be a minimum of # 16 

AWG copper wire rated at 75 °C (167 

°F) or higher. These requirements must 

be met to prevent injury and machine 

damage. Consult a qualified electrician if

in doubt.

•  Do not use any extension cord or 

portable outlet device to connect the 

dishwasher to a power supply.

•  Ensure that any plastic wrappings, bags, 

small pieces etc. are disposed of safely 

and kept out of the reach of children. 

Danger of suffocation!

•  Remove the door to the washing 

compartment when removing an old 

dishwasher from service or discarding it. 

Ensure that the appliance presents no 

danger to children while being stored for 

disposal.

•  Old appliances may contain materials 

that can be recycled. Please contact 

your local recycling authority about the 

possibility of recycling these materials.

•  The dishwasher drain hose must be 

installed with a drain loop at least 28” 

(710mm) off the cabinet floor; otherwise

the dishwasher may not drain properly.

•  This dishwasher is intended for 

residential use only, and should not be 

used in commercial establishments.

•  New installation - If the dishwasher is a 

new installation, most of the work must 

be done before the dishwasher is moved 

into place.

•  Replacement - If the dishwasher is 

replacing another dishwasher, check 

the existing dishwasher connections for 

compatibility with the new dishwasher, 

and replace parts as necessary.

After unpacking the dishwasher and prior 

to installation, thoroughly inspect the 

dishwasher for possible freight or cosmetic 

damage. Report any damage immediately.

•  Cosmetic defects must be reported within 

10 days of installation.

•  Do not discard any bags or items that 

come with the original package until 

after the entire installation has been 

completed.

You may either call our Toll Free Number at 

1-800-459-9848 or contact us via the web 

site at

or Contact the Blomberg Distributor for 

your State or Province as listed on the 

Distributor Contact List provided.