Black Box ET0010A User Manual

Adding a Network Set

EncrypTight User Guide

171

Select the desired Key Management System from the Default ETKMS 

list. You must select a ETKMS even if the network set does not include 

a PEP. If you create a policy that includes a network set that does not 

have a ETKMS, you will not be able to deploy that policy.

Select the desired network addressing mode. The network addressing 

mode specifies the source IP address used in the packet header.
• Use Network IP Address (default) - original packet header 

containing the network’s IP address is used for all outgoing packets. 

• Use PEP’s Remote IP Address - the PEP’s remote port IP address 

is inserted into the packet header for all outgoing packets. This 

option is not available if the network set contains more than one 

PEP.

• Use Virtual IP Address - the virtual IP address is inserted into the 

packet header for all outgoing packets. If you select this option, 

enter the IP address to use as the source address for outgoing 

packets in the Virtual IP Address box.

Depending on the type of PEP selected and its configuration, some 

options may not be available. ETEP PEPs preserve the original network 

address by default and must be explicitly configured to use any other 

mode. For more information on how to configure your PEP, see the 

configuration chapter for your PEP. 
For more information on network addressing modes, see 

.

This setting can be overridden by settings in a policy. For more 

information, see 

.