Black Box ET0010A User Manual

EncrypTight Software Installation

EncrypTight User Guide

39

In order for EncrypTight components to communicate, you need to make sure that any firewalls in your 
system are configured to allow the following protocols. 

EncrypTight installation tasks are described in the following topics:

●

●

●

●

●

To install EncrypTight for the first time, follow the procedure below. 

To install the EncrypTight software:
1 Quit all programs before installing EncrypTight.
2 Insert the EncrypTight CD into the CD-ROM drive. The installation program should start 

automatically. If it does not, open the CD and double click 

EncrypTight.exe

.

3 Follow the instructions in the installation wizard. Click Next to advance through the wizard.
4 When the installation is complete, click Done to quit the installer. 

FTP

TCP 20, 21

Used for upgrading the software on a PEP. 

HTTP

TCP 80

Used to communicate management information to EncrypTight 

appliances when TLS is disabled.

ICMP/Ping

Used to check connectivity with a device.

IPsec ESP

IP protocol 50

Used in encryption policies.

SFTP

TCP 22

Used for secure FTP operations.

SNMP 

UDP 161, 162

Used to send SNMP traps from the PEPs to a management 

workstation.

SNTP

UDP 123

Used for time synchronization among EncrypTight components.

SSH 

TCP 22

Used to securely access the CLI on ETEP PEPs and the 

ETKMS.

Syslog

UDP 514

Used to send syslog messages from the PEPs to a syslog 

server.

TLS (HTTPS)

TCP 443

A secure method of communicating management information 

between ETEMS and the PEPs.

XML-RPC

TCP 443

Used for communications between ETPM and the ETKMSs and 

between the ETKMSs and the PEPs.