Black Box ET0010A User Manual

Upgrading External ETKMSs

EncrypTight User Guide

79

To mount the CDROM drive:
1 Insert the disk in the drive and close it.
2 If it doesn’t already exist, create the directory 

/media/cdrom

.

3 Enter the following command:

To install the new ETKMS software:
1 Install ETKMS RPM with the following commands:

2 Verify that the ETKMS RPM is installed and unmount the CD with the following commands:

To configure the new ETKMS software:
1 Edit

 /opt/etkms/bin/etkmsParams.sh 

for the correct IP address and ETKMS name.

2 Edit

 /opt/etkms/conf/kdist.properties 

for any custom settings.

If you have custom certificates installed, use the following command to copy the etkms.keystore 
file from etkms.orig directory to the /keys directory.

To start the ETKMS software:
1 Type the following to start the ETKMS service. 

If you use a backup ETKMS, start the primary ETKMS first and then start the backup ETKMS.