Black Box ET0010A User Manual

Provisioning Appliances

98

EncrypTight User Guide

3 Optionally, for ETEP appliances with software version 1.6 and later, click Put Throughput License 

to install a license as part of the operation. You can also install a license separately from the Put 
Configuration operation. To learn more about licenses and throughput speeds, see 

. 

4 In the Put Configurations window, click Put to push configurations, and policies if applicable. The 

results are shown in the Result column. Common results are shown in 

.

5 Click Close to return to the Appliances view, and then refresh the appliance status (Tools > Refresh 

Status). If you chose to reboot the appliances after loading the configurations, wait a few minutes for 
the reboot operation to complete before refreshing the status.

●

●

The Appliance Manager lists the appliances that ETEMS is managing. It shows information about each 
appliance, such as its operational status, IP addresses, product family and software version, and date and 
time. See 

 for a description of these fields.

Pending

The appliance is selected, but the configuration has not yet been 

pushed.

OK

The configuration was successfully pushed to the appliance.

Operation failed: [reason]

A problem was encountered during the put operation. ETEMS provides 

a brief description of the reason for the failure.

Reboot Needed

Some configuration items require a reboot to take effect.