Lennox Hearth TK3-36BL Leaflet

 

 

LENNOX HEARTH PRODUCTS

KITS AND ACCESSORIES

Description 

 

 

 
1 ea. Top Panel 
1 ea. Left Side Panel 
1 ea. Right Side Panel 
6 ea. Magnets 
 
*  Note: Trim Kits with Brass and Stainless Finishes also include:  

 
  1 ea. Left Side Channel 
  1 ea. Right Side Channel 
  1 ea. Top Channel 
  Double-sided tape on panels 
(If the kit you purchased includes channels and double-sided tape, they 
should be used) 
 

 
None 
 
INSTALLATION INSTRUCTIONS: 

 
This kit contains trim panels used to finish the gaps between the wall-
board or optional mantel and the fireplace, providing the appliance a fin-
ished built-in look.   

 
ENSURE FIREPLACE IS COOL TO THE TOUCH BEFORE STARTING IN-
STALLATION OF THE TRIM KIT 

 
Step 1. Place 2 magnets on each side of the fireplace, placed at approxi-
mately 8” from the top and 8” from the base. See Figure 2. 

 

Step 2.  

  Brass and Stainless Trim Kits - Proceed to Step 3.  
  Black Trim Kits - Proceed to Step 4.  

Step 3. Place the side channels over the magnets (See Figure 3 ). 
Ensure that the two side channels are flush with the bottom of the 
fireplace. The wider side of the side channel should be on the front of 
the fireplace face after installation. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Step 3. Peel off the backing on the double-sided tape on the backside 
of each side trim panel (see Figure 4 ).  Avoid touching the sticky 
surface of the tape.