Transition Networks RS-232-TO-100BASE-FX User Manual

Transition Networks

 

SDSFE31xx-100 Industrial Device Server

 

24-Hour Technical Support:   1-800-260-1312   International: 00-1-952-941-7600

 

viii 

  

Make sure that you read and understand all content identified by these two symbols: 

   

 

Cautions and warnings appear here and throughout this manual where appropriate. 
Failure to read and understand the information identified by the “caution” and 
“warning” symbols could result in poor equipment performance, damage to 
equipment, or injury to persons. 

   

Cautions indicate the possibility of damage to equipment. 

 

  CAUTION 

Make sure that the Device Server is mounted with proper space around it for 
ventilation (heat dissipation). Failure to observe this caution could result in 
damage to the Device Server. 

 

  CAUTION 

Please exercise caution when using power tools. Do not install this unit in damp 
or wet locations, or in close proximity to very hot surfaces. Failure to observe 
this caution could result in damage to the Device Server and cables.  

 

  CAUTION 

Only qualified persons should install the Device Server. Failure to observe this 
caution could result in poor performance or damage to the Device Server. 

 

  CAUTION 

Install the Device Server in an environment where the temperature range is from 
0ºC to 70ºC (32º to 158º F), with relative humidity of 5% to 90%, non-
condensing. Failure to observe this caution could result in poor Device Server 
performance. 

 

  CAUTION 

DO NOT install the Device Server in areas where strong electromagnetic fields 
(EMF) exist. Failure to observe this caution could result in poor Device Server 
performance and data corruption. 

 

  CAUTION 

The Device Server must be mounted to a well-grounded surface. Failure to 
observe this caution could result in EMI problems.