Smeg SE2320ID1 User Manual
Instructions for the installer
30
8.5 Mounting
Before mounting the device to the unit, lay the provided adhesive sponge onto
the glass surface to separate it from the unit.
the glass surface to separate it from the unit.
After fixing the provided adhesive sponge (B) to the glass, mount the device to
the unit with the mounting brackets (A) provided with the device itself, as shown
in the figure.
When fixing the hob to the cabinet, use only the holes provided, illustrated here.
8.6 Ventilation
Installation of an oven without cooking fan underneath the hob is forbidden.
In any event, if installed above an oven or a dishwasher, a space of at least 5 cm must be left
between the hob and the top of the appliance installed below.
between the hob and the top of the appliance installed below.
In addition to this, leave an opening of at least 4 mm between the top of the front panel of the
built-in oven beneath and the base of the hob (see figure below)
Do not obstruct the ventilation grille in front of the product in any type of installation
Below are illustrations of two cases (1 and 3) of installation suitable for correct ventilation and one case
(n° 2) of installation to be avoided
Below are illustrations of two cases (1 and 3) of installation suitable for correct ventilation and one case
(n° 2) of installation to be avoided