Panasonic KY-B64CA User Manual

46

Electrical Requirements

Installation of the Earth Leakage Circuit Breaker

 

This appliance must be supplied with the proper voltage and frequency, and 

connected to an individual, properly earthed branch circuit, protected by a circuit 

breaker or fuse. (The rating plate is on the bottom of the appliance.)

 

This appliance is not fitted with other means for disconnection from the supply 

mains having a contact separation in all poles that provide full disconnection 

under overvoltage category III conditions. Means for disconnection must be 

incorporated in the fixed wiring in accordance with the wiring rules.

 

Two-wire, single-phase A.C. 220-240 V, 40 A, 50 Hz electrical system must 

be used. (It is also possible to use a four-wire, three-phase.) If connecting to 

aluminum wiring, use connectors approved for use with aluminum wiring.

 

Check with the local utilities for electrical codes applied in the area. Failure to 

wire the appliance according to governing codes may result in a hazardous 

condition. 

 

After installation, show the customer where the breaker for the appliance is 

located.

 

In accordance with the electrical wiring rules, incorporate the earth 

leakage circuit breaker in the home electrical wire.

 

Follow the specification of the earth leakage circuit breaker as follows. 

Rated current: 40 A, rated sensitivity current: 30 mA

WARNING

Electrical work must be performed by a legally qualified electrician.