Jenn-Air JGC8645 User Manual

• Remove knobs in the OFF position by

pulling up.

• Wash, rinse and dry. Do not use abrasive

cleaning agents as they may scratch the
finish.

• Turn on each burner to be sure the knobs

have been correctly replaced.

Porcelain enamel is glass fused on metal and
may crack or chip with misuse. It is acid
resistant, not acid proof. All spillovers, espe-
cially acidic or sugary spillovers, should be
wiped up immediately with a dry cloth.

• When cool, wash with soapy water, rinse

and dry.

• Never wipe off a warm or hot surface with

a damp cloth. This may cause cracking or
chipping.

• Never use oven cleaners, abrasive or caus-

tic cleaning agents on exterior finish of
range.

• DO NOT USE ANY CLEANING PROD-

• ALWAYS WIPE WITH THE GRAIN

• Daily Cleaning/Light Soil –– Wipe with

one of the following - soapy water, white
vinegar/water solution, Formula 409 Glass
and Surface Cleaner* or a similar multi-
surface cleaner - using a sponge or soft
cloth. Rinse and dry. To polish and help
prevent fingerprints, follow with Stainless
Steel Magic Spray (Jenn-Air Model A912,
Part No. 20000008)**.

• Moderate/Heavy Soil –– Wipe with

one of the following - Bon Ami*, Smart
Cleanser*, or Soft Scrub* - using a damp
sponge or soft cloth. Rinse and dry. Stub-
born soils may be removed with a damp
Scotch-Brite* pad; rub evenly with the

• Be sure appliance is off and all

• To prevent staining or discoloration,

clean appliance after each use.

• If a part is removed, be sure it is

correctly replaced.

• The surface burner heads are removable.

The cap portion of the head is porcelain
and the port area is aluminum.  Wash the
burner heads in the sink with mild deter-
gent and a plastic scrubber.

• Check to be sure all ports are open.  To

open clogged  ports, insert a straight pin
directly into each port.  Do not enlarge or
distort the port.

• When replacing the burner heads, care-

fully align the tab on the burner base with
the indentation in the head.  The two pins
will fit in the slots when the tab is aligned
with the in-
dentation.

• Wash with warm, soapy water and a non-

abrasive, plastic, scrubbing pad or in the
dishwasher.  For stubborn soils, clean with
a soap-filled, nonabrasive, plastic pad or
Cooktop Cleaning Creme (Part No.
20000001)** and a sponge.

• The grates are made of porcelain on cast

iron and are very durable, however, they
will gradually lose their shine and/or dis-
color.  This is due to exposure to high
temperatures from the gas flame.

BURNER HEAD

BURNER BASE

* Brand names for cleaning products are registered trademarks of the respective manufacturers.
** To order direct, call 1-800-688-8408.

• Check to be sure plug is securely inserted

into receptacle.

• Check or re-set circuit breaker.  Check or

replace fuse.

• Check power supply.
• Check to be sure burner is correctly rated

for your kind of gas.

• Check to be sure burner ports or ignition

ports are not clogged.

• Check to be sure ignitor is dry and clicking.

Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn’t click, turn
control knob OFF.

• Check to be sure burner head is correctly

seated on the burner base.

• Check to be sure a pan is sitting on the grate

above.

• Contact an authorized Jenn-Air servicer.

• Burner ports may be clogged.
• Flame may need to be adjusted. Contact an

authorized Jenn-Air servicer.

• Contact an authorized Jenn-Air servicer.
• Some yellow tips on the flame are accept-

able when using LP gas.

grain. Rinse and dry. To restore luster and
remove streaks, follow with Stainless Steel
Magic Spray.

• Discoloration –– Using a damp sponge or

soft cloth, wipe with Cameo Stainless Steel
Cleaner*. Rinse immediately and dry. To
remove streaks and restore luster, follow
with Stainless Steel Magic Spray.