Jenn-Air JGCP548 User Manual

■

Has a household fuse blown, or has a circuit breaker 
tripped?
Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.

■

Is this the first time the surface burners have been used?
Turn on any one of the surface burner knobs to release air 
from the gas lines.

■

Is the control knob set correctly?
Push in knob before turning to a setting.

■

Are the burner ports clogged?
On sealed burner models, see “Sealed Surface Burners” 
section.

■

Are the burner ports clogged? 
On sealed burner models, see “Sealed Surface Burners” 
section.

■

On models with caps, are the burner caps positioned 
properly?
See “Sealed Surface Burners” section.

■

Is propane gas being used?
The appliance may have been converted improperly.
Contact a trained repair specialist.

■

Is the burner wet?
Let it dry.

■

Is there continuous sparking, but the burner does not 
light?
Discontinue use of the surface burner and contact a service 
technician.

■

Is the cookware the proper size?
Use cookware about the same size as the surface cooking 
area, element or surface burner. Cookware should not extend 
more than ½" (1.3 cm) outside the cooking area.

■

Is the proper cookware being used?
See “Cookware” section.

■

Is the control knob set to the proper heat level?
See “Cooktop Controls” section.

■

Is the cooktop level?
Level the cooktop. See the Installation Instructions.

■

Was the griddle preheated?
Preheat griddle. See “Electric Chrome Griddle” section for 
more information.

■

Are foods taking too long to cook?
Partially frozen or very cold foods will increase cooking time. 
Thoroughly defrost foods.