Black & Decker EF2750 User Manual

Page of 28
4
ENGLISH
•  When not in use, the appliance should be 
stored in a dry place. Children should not 
have access to stored appliances. 
Inspection and repairs
•  Before use, check the appliance for 
damaged or defective parts. Check for 
breakage of parts, damage to switches and 
any other conditions that may affect its 
operation. 
•  Do not use the appliance if any part is 
damaged or defective. 
•  Have any damaged or defective parts 
repaired or replaced by an authorised repair 
agent.
•  Before use, check the power supply cord for 
signs of damage, ageing and wear. 
•  Do not use the appliance if the power supply 
cord or mains plug is damaged or defective. 
•  If the power supply cord or mains plug is 
damaged or defective it must be repaired by 
an authorised repair agent in order to avoid a 
hazard. Do not cut the power supply cord 
and  do not attempt to repair it yourself. 
•  Never attempt to remove or replace any 
parts other than those specified in this 
manual. 
•  Do not attempt to repair the appliance. Take 
it to your nearest Black & Decker-owned or 
authorised Service Centre for repair. 
Electrical safety
•  This product must be earthed. Always check 
that the power supply corresponds to the 
voltage on the rating plate. 
•  Power plugs must match the outlet. Never 
modify the plug in any way. Do not use any 
adapter plugs with earthed (Class 1) 
appliances. Unmodified plugs and matching 
outlets will reduce the risk of electric shock. 
Extension cables & Class 1 
product
•  A 3-core cable must be used as your 
appliance is earthed and of Class 1 
construction. 
•  Up to 30m (100ft) can be used without loss of 
power. 
•  If the supply cord is damaged, it must be 
replaced by the manufacturer or an 
authorized Black & Decker Service Center in 
order to avoid a hazard.
Mains plug replacement
If a new mains plug needs to be fitted:
•  Safely dispose of the old plug
•  Connect the brown lead to the live terminal of 
the new plug
•  Connect the blue lead to the neutral terminal
•  If the product is class I (earthed), connect the 
green/yellow lead to the earth terminal.
Note: If your product is class II double insulated 
(only 2 wires in the cord set), no connection is to 
be made to the earth terminal.
Follow the fitting instructions supplied with good 
quality plugs
Any replacement fuse must be of the same 
rating as the original fuse supplied with the 
product.
Warning! The above section on mains plug 
replacement is for authorized service centre 
personals.