Hobart DGC504 User Manual

Page of 4
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 4 of 4 
F-39821 – DGC5 Series Gas Convection Ovens
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Printed On Recycled Paper
DGC5 SERIES GAS
CONVECTION OVENS
F-39821 (REV. 05/07) 
LITHO IN U.S.A. (H-01)
SPECIFICATIONS
General: Gas convection oven. Basic section  
(DGC5) is without legs; may be ordered separately 
for replacement, for stacking 2-high or for mounting 
on legs. 
DGC501 single basic section on 25
3
4
" legs. 
DGC502 two basic DGC5 sections on 8" legs.
Construction: Stainless steel front, sides and top, 
painted legs. Porcelain enamel on steel oven  
interior. Independently operated solid stainless steel 
doors open a full 180 degrees. Two interior oven 
lights per section. Non-sag insulation applied to the 
top, rear and sides, bottom and doors.
Oven interior measures 29" w x 22
1
8
" d x 20"h. Five 
nickel plated oven racks per section measure 28
1
4
" x 
20
1
2
". Eleven position nickel plated rack guides with 
positive rack stops per section.
Controls: Side mounted solid state temperature 
controls adjust from 150° to 500°F. 60-minute timer 
with audible alarm. Oven cool switch for rapid cool 
down.
Gas: One 44,000 BTU/hr. burner per section. 88,000 
BTU/hr. for Model DGC502. Electronic spark igniter.
Electrical: Two-speed 
1
2
 H.P. oven blower motor per 
section. 115/60/1 power supply required. 6 foot cord 
and plug. 9 amps total draw.
IMPORTANT
WHEN ORDERING: The following must be specified:
 
1)  The type of gas
 
2)  The altitude when above 2,000 ft.