Beko CBI 7701 HCA User Manual

Page of 246
EN
9
out the electric plug and, if there are 
any locks on the door, make them 
inoperable in order to protect children 
against any danger.
Placing and Installation
A
 If the entrance door of the room 
where the refrigerator will be 
installed is not wide enough for the 
refrigerator to pass through, then call 
the authorised service to have them 
remove the doors of your refrigerator 
and pass it sideways through the 
door. 
1. Install your refrigerator to a place that 
allows ease of use.
2. Keep your refrigerator away from heat 
sources, humid places and direct 
sunlight.
3. There must be appropriate air 
ventilation around your refrigerator in 
order to achieve an efficient operation. 
If the refrigerator is to be placed in a 
recess in the wall, there must be at 
least 5 cm distance with the ceiling 
and at least 5 cm with the wall. 
I
f the 
floor is covered with a carpet, your 
product must be elevated 2.5 cm 
from the floor. 
4. Place your refrigerator on an even floor 
surface to prevent jolts.
5. Do not keep your refrigerator in 
ambient temperatures under 10°C.
Replacing the interior light 
bulb 
Should the light fail to work, proceed 
as follows.
1- Switch off at the socket outlet and 
pull out the mains plug.
You may find it useful to remove 
shelves for easy access.
2- Use a flat tipped screwdriver to 
remove the light diffuser cover.
3- First check that the bulb hasn’t 
worked loose by ensuring it is screwed 
securely in the holder. Replace the 
plug and switch on.
If the bulb works, replace the light 
cover by inserting the rear lug and 
pushing up to locate the front two 
lugs.
4- If the light still fails to work, switch 
off at the socket outlet and pull out 
the mains plug. Replace the bulb with 
a new 15 watt (max) screw cap (SES) 
bulb.
5- Carefully dispose of the burnt-out 
light bulb immediately.
Replacement light bulb can easily be 
obtained from a good local electrical or 
DIY store.