Crane Merchandising Systems 673 User Manual
Cup Configuration
HDC II Programming Guide
6730018
23
July, 2003
SET UP CUP SIZES
Make sure the cup sizes you select agree with the cups you have actually loaded
during setup.
during setup.
1.
Press
the display shows
X OZ Y. "X" is the currently selected
drink size for the cups in turret 2 (normally large cups), "Y" is the currently
selected drink size for the cups in turrets 1A and 1B (normally regular
cups).
selected drink size for the cups in turrets 1A and 1B (normally regular
cups).
2.
Press
to toggle through the #1 cup ring sizes; press
to
toggle the #2 cup ring size.
3.
Any changes made to the cup sizes must be "locked in". There are two
ways to do this:
ways to do this:
a. If you are keeping some cup sizes the same, or putting the cups in differ-
ent cup rings, press and hold
. The display momentarily shows
CLEARING, two beeps sound, then shows FINISHED. This will reassign the
old throw times to the new cup ring, if possible.
old throw times to the new cup ring, if possible.
b. If you are loading all different size cups, or want to load all new default
times, press and hold
. The display momentarily shows
CLEARING, two beeps sound, then shows FINISHED. This will reload the
factory default times for all cup sizes, clearing any custom throw times
you have established. (See the tables on the following pages for the fac-
tory default times.)
factory default times for all cup sizes, clearing any custom throw times
you have established. (See the tables on the following pages for the fac-
tory default times.)
4.
CONTINUE.