GE r10279v User Manual

2

Design Guide
The Installation Space ............................. 3
Product Clearances ................................... 3
Side-by-Side Installation ........................ 3

Installation Instructions
Tools, Hardware .......................................... 4
Grounding the Product ............................ 4
Staining Wood Drawer Fronts .............. 4
Installing the Custom Frame Panel ... 4
Step 1, Remove Packaging .................... 4
Step 2, Reverse Door Swing .................. 5
Step 3, Leveling ........................................... 6
Step 4, Connect Power ............................ 6

Step 5, Slide Product into Cutout ........ 6
Step 6, Install Nameplate ....................... 6
Step 7, Set Temperature Controls ...... 6
Custom Frame Panel Models ............... 6
ZTBSS1 Monogram
Tubular Handle Kit ..................................... 7
Template for Nameplate .. Back Cover

IMPORTANT –

 Save these instructions

for local inspector’s use.

IMPORTANT –

 Observe all governing codes

and ordinances.

– Be sure to leave these

instructions with the Consumer.

Note to Consumer 

– Keep these instructions with

your Owner’s Manual for future reference.

 

This appliance must be properly

grounded. See page 4.

Cet appareil doit être correctement mis à la terre.
Consultez page 4.

If you received a damaged wine chiller, wine reserve
or beverage center, you should immediately contact your
dealer or builder.

 Installation requires basic mechanical

skills. Proper installation is the responsibility of the
installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty.

• Use this appliance only for its intended purpose.
• Immediately repair or replace electrical service cords

that become frayed or damaged.

• Unplug the unit before cleaning or making repairs.
• Repairs should be made by a qualified service

technician.

• Il ne faut utiliser cet appareil que pour l’usage pour

lequel il a été construit.

• Il faut réparer ou remplacer immédiatement tout

cordon d’alimentation électrique effiloché ou
endommagé.

• Débrancher le bar ou le réfrigérateur a vin avant

le nettoyage ou toute intervention.

• Les réparations doivent être faites par un technicien

qualifié.