Frigidaire beverage cooler User Manual

Page of 13
 
 
 
 
 
 
 
 
 
 
 
 
 
ENERGY SAVING TIPS 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
BEVERAGE COOLER FEATURES 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CLEANING AND MAINTENANCE 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ADJUSTABLE INTERIOR SHELVES 
 
Multi-position adjustable interior shelves can be moved to 
any position for larger or smaller packages. The shipping 
spacers that stabilize the shelves for shipping should be 
removed and discarded. 
TYPICAL BEER SERVING EQUIVALENTS 
 
½ Keg = 15 ½ Gallons = 1984 Fluid Ounces 
½ Keg = 6 ¾ Cases of 12 ounce bottles 
Overall weight of full ½ Keg is approximately 165 pounds. 
 
¼ Keg = 7 ¾ Gallons = 992 Fluid Ounces 
¼ Keg = 3 3/8 Cases of 12 ounce bottles 
Overall weight of full ¼ Keg is approximately 82.5 pounds. 
• Install the beverage cooler in the 
coolest part of the room, out of 
direct sunlight and away from 
heating ducts or registers. Do not 
place the beverage cooler next to 
heat-producing appliances such 
as a range oven or dishwasher. 
• Do not overcrowd the beverage cooler or block cold air 
vents. Doing so causes the beverage cooler to run longer 
and use more energy. Shelves should not be lined with 
aluminum foil, wax paper or paper toweling. Liners 
interfere with air circulation, making the beverage cooler 
less efficient. 
• Organize the beverage cooler to reduce door openings. 
Remove as many items as needed at one time and close 
the door as soon as possible. 
BEER STORAGE TEMPERATURE 
 
• Draft beer is not pasteurized, so it must be kept cold, 
preferably at 38ºF. Temperatures above 38ºF may cause 
the beer to become wild, turn sour and cloudy. 
CLEANING THE OUTSIDE 
 
Wash the cabinet with warm water and mild liquid 
detergent. Rinse well and wipe dry with a clean soft cloth. 
Replace parts. 
CLEANING THE INSIDE 
 
• Wash inside surfaces of the beverage cooler with a 
solution of two tablespoons of baking soda in one quart 
(1.136 liters) warm water. Rinse and dry. Wring excess 
water out of the sponge or cloth when cleaning in the area 
of the controls, or any electrical parts. 
 
• Wash the removable parts with the baking soda solution 
mentioned above, or mild detergent and warm water. 
Rinse and dry. NEVER use metallic scouring pads, 
brushes, abrasive cleaners, or alkaline solutions on any 
surface. DO NOT was  removable parts in the dishwasher.
h
OPTIONAL CASTER KIT 
 
If you’d like to make your beverage cooler so it can be rolled 
from room to room, there is an optional caster kit available 
from your authorized Frigidaire dealer or service center. Just 
ask for part number 297027300 - Caster, Rail and Hardware 
Kit, which includes 2 fixed casters, 2 swivel casters, 2 caster 
support rails and mounting hardware. 
CASTERS