Cisco Systems DOC-7812945= User Manual
7-2
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 7 Service Class Template Manager
SCT Load
SCT Load
The sctLoad utility included in CWM Release 10.5 is a tool designed for uploading SCT files that will
be used for provisioning. There are a number of pre-configured default files available, including SCT2,
SCT3, SCT4, and SCT5.
be used for provisioning. There are a number of pre-configured default files available, including SCT2,
SCT3, SCT4, and SCT5.
Note
SCT2 and SCT3 are used for PNNI, and SCT4 and SCT5 are used for MPLS; SCT2 and SCT4 are used
for policing, and SCT 3 and SCT 5 are used for no policing.
for policing, and SCT 3 and SCT 5 are used for no policing.
The following output informs the user that there are additional parameters which are not used for SCT2
and SCT3. This informative output appears when using sctLoad to load SCTs versions 2.0 and earlier
into a system which operates on SCTs for PXM 45, Release 2.1. The SCTs for PXM 45, Release 2.1
contain MPLS data which is not present in the earlier versions of SCTs. In this case, the sctLoad utility
informs the user that this data is missing and that it is inserting default data into the missing fields in
order to upgrade the SCT files to the latest SCT format. When SCT2 or SCT3 are uploaded, the sctLoad
utility will add default values to the missing fields, as shown in the example:
and SCT3. This informative output appears when using sctLoad to load SCTs versions 2.0 and earlier
into a system which operates on SCTs for PXM 45, Release 2.1. The SCTs for PXM 45, Release 2.1
contain MPLS data which is not present in the earlier versions of SCTs. In this case, the sctLoad utility
informs the user that this data is missing and that it is inserting default data into the missing fields in
order to upgrade the SCT files to the latest SCT format. When SCT2 or SCT3 are uploaded, the sctLoad
utility will add default values to the missing fields, as shown in the example:
sjnms12% sctLoad -f AXSM_SCT.PORT.5
SCT VC data (12, 6) undefined, setting to default (1)
Exiting SctLoad ...
sjnms12% sctLoad -f AXSM_SCT.CARD.2
SCT VC data either undefined or missing due to old file format.
Setting missing data to default values...
Exiting SctLoad ...
Note
The sctLoad utility has successfully finished loading SCT file(s) when "
Exiting SctLoad ... " appears at
the bottom of the output screen
.
Note
It is recommended that the user hits the Enter key after modifying any parameter values within an SCT
file.
file.
Initializing SCT
When a PXM card is installed for the first time it does not have SCT files. Therefore, the user must
upload SCT 2, 3, 4 and 5 files from the switch to CWM via the sctLoad utility. The user will first need
to FTP the files from the switch to the directory
upload SCT 2, 3, 4 and 5 files from the switch to CWM via the sctLoad utility. The user will first need
to FTP the files from the switch to the directory
~svplus/sct-file/1
, and then use the sctLoad utility to
load these files into the database.
Note
SctLoad passes SCT information to the CWM database. You can FTP the default SCT files from the
switch to the CWM workstation, and then use the SctLoad command to upload SCTs to CWM.
switch to the CWM workstation, and then use the SctLoad command to upload SCTs to CWM.
After they have been uploaded, the retrieved SCT files are displayed when you select the SCT tab which
is also the default tab of the Navigator panel.
is also the default tab of the Navigator panel.
shows the SCT Main window.