Cisco Systems DOC-7812945= User Manual
9-10
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 9 Summary Report and Wingz Report
Configuring Summary Reports
Figure 9-5
Connection Traffic Summary Window
The statistic types used to plot this report are based on the end-point type of the connection.
describes the statistic types needed. The Report Application retrieves all instances (within the plot
period) of the statistic types from the database and calculates the following:
period) of the statistic types from the database and calculates the following:
•
percent received from the network = (number of bits per second / CIR) * 100
•
percent transmitted to the network = (number of bits per second / CIR) * 100
•
percentage of time in service = (seconds in service / (bucket interval * 60)) * 100
The following conversions are used to convert to bits per second:
•
for FR endpoints, convert bytes received to bits per second (number of bytes received / (bucket
interval * 60)) * 8
interval * 60)) * 8
•
for ATM/CE endpoints, convert cells received to bits per second, using Connection Manager’s
conversion formula (each cell has a 48 byte payload)
conversion formula (each cell has a 48 byte payload)
— bps = (number cells received / (bucket interval * 60)) * 48 * 8
•
for VOICE/DATA endpoints, convert packets to bits per second (each packet has 24 bytes)
— bps = ((number packets received / (bucket interval * 60)) * 24 * 8
When the Include Peak Data button is enabled, the percent peak values of the total traffic transmitted
and received for a selected PVC are displayed along with the average values in the same graph. The
average raw counts are displayed in tabular form.
and received for a selected PVC are displayed along with the average values in the same graph. The
average raw counts are displayed in tabular form.