DeLonghi KF8150M User Manual

Blender KF8150M

10

A) If your appliance comes fitted with a plug, it will incorporate a

13 Amp fuse. If it does not fit your socket, the plug should be
cut off from the mains lead, and on appropriate plug fitted, as
below. warning:Very carefully dispose of the cut off plug after
removing the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard.With alterna-
tive plugs not incorporating a fuse, the circuit must be protect-
ed by a 15 Amp fuse. If the plug is a moulded-on type, the fuse
cover must be re-fitted when changing the fuse using a 13 Amp
Asta approved fuse to BS 1362. In the event of losing the fuse
cover, the plug must NOT be used until a replacement fuse
cover can be obtained from your nearest electrical dealer.The
colour of the correct replacement fuse cover is that as marked
on the base of the plug.

B) If your appliance is not fitted with a plug, please follow the

instructins provided below:

warning - this appliance must be earthed

important

The wires in the mains lead are coloured in accordance with the

following code:

Green and yellow Earth
Blue

Neutral

Brown

Live

As the colours of the wires in the mains lead may not correspond
with the coloured markings identifying the terminals in your plug,
proceed as follows:
The green and yellow wire must be connected to the terminal in
the plug marked with the letter E or the earth symbol          
or coloured green or green and yellow.
The blue wire must be connected to the terminal marked with the
letter N or coloured black.
The brown wire must be connected to the terminal marked with
the letter L or coloured red.

N

E

L