Whirlpool ADG 7470 User Manual

Page of 8
GB -1-
Chart
PROGRAMME SELECTION BUTTON
Press button “P” (repeatedly) until the indicator of the required programme lights up (see “Table of 
programmes” below).
ON
BUTTON
OFF
BUTTON
START BUTTON
The indicator lights up during operation, flashes when a fault occurs and goes off at the end of the programme. 
START BUTTON RESET FUNCTION
Press this button for at least 2 seconds; the selected programme and options are cancelled. Main failure 
displays (repeated flashing of the START indicator lamp) can be cancelled by RESETTING. Detailed 
instructions are given in chapter “What to do if...”.
1) Programme data obtained in conformity with European standard EN 50242, obtained under normal conditions 
(without additional options) and may vary depending on conditions. Differences of up to 20 minutes are possible 
with sensor programmes as a result of the appliance’s automatic calibration system.
2) Reference programme for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for 
detailed information on the EN/Standard loading comparison test and other tests, contact the following address: 
“nk_customer@whirlpool.com”.
Table of programmes
Deter-
gent
Consumption
P
Programmes
Loading instructions
Litres
kWh
Minutes
1)
1
Pre-Wash
cold
Crockery to be washed later.
5.0
0.02
10
2
Quickwash
40°C
Lightly soiled crockery, with no 
dried-on food. * Use of tablets 
not recommended.
*
13.0
0.70
30
3
Eco
2)
50°C
Normally soiled crockery. 
Energy-saving programme.
X
15.0
1.05
165
4
Intensive
70°C
Recommended programme for 
heavily soiled crockery, especially 
suitable for pots and pans.
X
17.0
1.65
145
5019 396 01787
ADG 7470
BEFORE USING THE APPLIANCE FOR THE 
FIRST TIME CAREFULLY READ THIS QUICK 
REFERENCE GUIDE AND THE ASSEMBLY 
INSTRUCTIONS! THE GUARANTEE IS NOT 
APPLICABLE IF FAULTS ARE CAUSED BY 
INCORRECT USE OF THE APPLIANCE. 
Quick reference guide