Cuisinart 10ce113938 Leaflet

We warrant that should your Cuisinart® Programmable Conical Burr Mill prove 

to be defective within the warranty period, we will repair it or replace it at our 

option, without charge to you. We recommend that you visit our website,  

www.cuisinart.com for a fast, efficient way to complete your product registra-

tion. However, product registration does not eliminate the need for the con-

sumer to maintain the original proof of purchase in order to obtain the warranty 

benefits. In the event that you do not have proof of purchase date, the purchase 

date for purposes of this warranty will be the date of manufacture. To obtain 

warranty service, simply call our toll-free number: 800-726-0190, for additional 

information from our Consumer Service Representatives, or send the product to 

Consumer Service at Cuisinart, 7811 North Glen Harbor Blvd., Glendale, AZ 

85307. To facilitate the speed and accuracy of your return, please enclose a check 

or money order for $4.00 for shipping and handling. 
(California residents need only supply proof of purchase and should call 1-800-

726-0190 for shipping instructions.) 

NOTE: For added protection and secure 

handling of any Cuisinart® product that is being returned, we recommend you 

use a traceable, insured delivery service. Cuisinart cannot be held responsible 

for in-transit damage or for packages that are not delivered to us. Lost and/or 

damaged products are not covered under warranty. Your Cuisinart® Program-

mable Conical Burr Mill has been manufactured to strict specifications and has 

been designed for use with the Cuisinart® Programmable Conical Burr Mill 

authorized accessories and replacement parts for your model. These warranties 

expressly exclude any defects or damages caused by accessories, replacement 

parts or repair service other than those that have been authorized by Cuisinart. 

These warranties exclude all incidental or consequential damages. Some states do 

not allow the exclusion of or limitation of incidental or consequential damages, 

so the foregoing limitation or exclusion may not apply to you.

California law provides that for In-Warranty Service, California residents have 

the option of returning a nonconforming product (A) to the store where it was 

purchased or (B) to another retail store which sells Cuisinart products of the 

same type. The retail store shall then, according to its preference, either repair 

the product, refer the consumer to an independent repair facility, replace the 

product, or refund the purchase price less the amount directly attributable to the 

consumer’s prior usage of the product. If the above two options do not result in 

the appropriate relief to the consumer, the consumer may then take the product 

to an independent repair facility if service or repair can be economically accom-

plished. Cuisinart and not the consumer will be responsible for the reasonable 

cost of such service, repair, replacement, or refund for nonconforming products 

under warranty. California residents may also, according to their preference, 

return nonconforming products directly to Cuisinart for repair or, if necessary, 

replacement by calling our Consumer Service Center toll-free at 800-726-0190. 

Cuisinart will be responsible for the cost of the repair, replacement, and shipping 

and handling for such nonconforming products under warranty.

Important: If the nonconforming product is to be serviced by someone other 

than Cuisinart’s Authorized Service Center, please remind the servicer to call 

our Consumer Service Center to ensure that the problem is properly diagnosed, 

the product serviced with the correct parts, and to ensure that the product is still 

under warranty. 

If you prefer, after selecting your grind setting, you have the 

option of manually controlling how much coffee the unit will 

grind. To do so, follow steps 1-4 on previous page. Then press 

and hold the manual button until the desired amount of coffee 

has been ground. The LCD will display M.
NOTE: To avoid overflow when using the manual feature, the 

grinder will automatically stop grinding when the maximum 

capacity has been reached.

When selecting your grind setting remember that the higher the 

number the coarser the grind. Use 1-6 for Espresso, 7-12 for 

Auto Drip, and 13-18 for French Press.

1. Be sure plug has been removed from outlet. 
2.  Beans can be removed from the hopper by lifting off the lid 

and pouring excess beans out. Hold down the Manual button 

to cleanout any remaining beans.

3.  The bean hopper, bean hopper lid, grind chamber, and grind 

chamber lid can be washed by hand with hot, soapy water or 

placed in the top shelf of a dishwasher. Dry thoroughly.

         a.   Remove the bean hopper by rotating counter-clockwise 

bringing the selector past grind setting 18, align the  

arrows and lift up. Make sure the hopper is empty.

         b.  Remove grind chamber by pulling toward you.
4.   Remove the burr grinder, once the bean hopper has been 

removed, by grasping the metal handle and lifting up. Use 

the brush to remove grinds or wash by hand. Replace the 

burr grinder onto the unit and rotate until the piece is fully 

inserted. Push handle down and replace hopper.

      NOTE: The hopper will not attach to the unit if the  

grinder has not been fully inserted.

5. Wipe body of grinder with a damp cloth.  

6.  Any other servicing or maintenance should be performed by an 

authorized service representative.

The Cuisinart® Programmable Conical Burr Mill carries a Limited  

18-Month Warranty.  This warranty is available to consumers only.   

You are a consumer if you are the owner of a Cuisinart® Programmable Conical 

Burr Mill that was purchased at retail for personal, family, or household use.  

Except as otherwise required by applicable state law, this warranty is not available 

to retailers or other commercial purchasers or owners. 

©2010 Cuisinart

150 Milford Road, East Windsor, NJ 08520

Printed in China  10CE113938

IB-8304A

10ce113938_cbm18_ib.indd   1-3

7/23/10   3:59:11 PM