Bunn SNG0033000 User Manual

Page 34

  This function allows the operator to prevent the 

start of a brew cycle if a Smart Funnel is not positioned 

correctly in the funnel rails.

1.  Press and hold the upper right hidden switch until 

display reads UNITS. Release the switch. Continue 

to press and release switch until display reads 

FUNNEL DETECT.

2.  NO or YES should be flashing to indicate the cur-

rent setting.

4. Select YES to prevent brewing if a Smart Funnel is 

not correctly situated in the rails.  If this function 

is activated and a brew cycle is attempted with the 

funnel not properly situated, the display will read,  

FUNNEL NOT IN PLACE, until one is in place.

5. Select NO to allow brewing without a Smart Fun-

nel in place. This is selected when brewing with a 

funnel other than a Smart Funnel (a regular brew 

funnel).

6.  When finished, press and release DONE. This will 

retain the changes, exit this function screen and 

advance to the next. Another alternative is to press 

the ON/OFF switch (either on DUAL brewers) lo-

cated on the front switch panel to exit the FUNNEL 

DETECT and return to the MAIN SCREEN.

1.  Press and hold the upper right hidden switch until 

display reads UNITS. Release the switch.  Continue 

to press and release switch until display reads 

SERVER DETECT.

2. The NO or YES flashes to indicate the current 

selection.

3. Select YES to prevent brewing if the Soft Heat 

server is not correctly positioned on the brewer 

beneath the funnel.  

NOTE: If  YES is selected and a brew cycle is attempted 

with a server not properly placed, the display will read 

SERVER NOT IN PLACE.

4. Select NO to allow brewing without a Soft Heat 

server in place. This is selected when brewing into 

a container other than a Soft Heat Server.

5.  When finished, press and release DONE. This will 

save the new setting, exit the function screen and 

advance to SERVICE TOOLS. Another alternative 

is to press the ON/OFF switch (either on DUAL 

brewers) located on the front switch panel to exit 

the SERVER DETECT function and return to the 

 

This function allows the operator to prevent the start 

of a brew cycle if a Soft Heat server is not positioned 

correctly on the brewer.

FUNNEL DETECT ?

 NO 

DONE 

YES

SEVER DETECT ?

 NO 

DONE 

YES

41341 080108