Sterling 238 User Manual

Powder hopper loaders are designed to provide safe and reliable 
operation when installed and operated within design specifications, 
following national and local safety codes. 

 

To avoid possible personnel injury or equipment damage when 
installing, operating, or maintaining this equipment, use good 
judgment and follow these safe practices: 

 

;  Follow all SAFETY CODES. 
;  Wear SAFETY GLASSES and WORK GLOVES. 
;  Disconnect and/or lock out power before servicing or 

maintaining the powder hopper loader. 

;  Use care when LOADING, UNLOADING, RIGGING, or 

MOVING this equipment. 

;  Operate this equipment within design specifications. 
;  OPEN, TAG, and LOCK ALL DISCONNECTS before 

working on equipment. You should remove the fuses and carry 
them with you. 

;  Make sure the hopper loader and components are properly 

GROUNDED before you switch on power. 

;  Do not jump or bypass any electrical safety control. 
;  Do not restore power until you remove all tools, test 

equipment, etc., and the powder hopper loader and related 
equipment are fully reassembled. 

;  Only PROPERLY TRAINED personnel familiar with the 

information in this manual should work on this equipment.