Panasonic AW-PH405N User Manual

0

  Mounting the camera

When mounting the camera, take sufficient care to ensure that the camera will not come off or fall down.



  Mount the lens onto the multi-purpose camera. 

• Use any of the portable lenses which are listed below.

HA18, HA1, HA series

HJ17e, HJ1e series

•  Do not use the large-sized lenses [with a weight of 11 lbs (5 kg) or more  

and a length of 15-/4” (400 mm) or more] with the model numbers  
which are listed below since when they are mounted on the camera,  
the camera’s overall balance will be upset.

HA4 series

HJ40 series, J5 series



  Align the multi-purpose camera with the guide pins and mount it. 

Change the positions of the guide pins and screws of the camera mounting base as shown in the figure below, and then 
attach the camera mounting base to the rotary arm.



 Do not use the rubber piece.

 Tighten up the two mounting screws securely using the tool.

  Just as for a convertible camera, change the positions of the guide pins and screws of the camera mounting base as shown 

in the figure above, and then attach the camera mounting base to the rotary arm.

  The current rating of LENS 

I/F () connector is 500 mA 
(max). 
Even with the lenses in a 
series which can be used,  
any lens whose maximum 
current consumption 
exceeds 500 mA cannot be 
used.  
Concerning the maximum 
current consumption of 
the lens, contact the lens 
manufacturer.