Panasonic AW-PH405N User Manual

9

Genlock input: 

 BNC 
Black burst or composite video signal, Tri Sync

(PROMPTER IN): 

 BNC 
Through output to PROMPTER connector

(PROMPTER OUT): 

D-SUB 15-pin

Camera video output
 

VIDEO: 

BNC, 75-ohm output

 

Y: 

BNC, 75-ohm output

 

Pr/C: 

BNC, 75-ohm output

 

Pb: 

BNC, 75-ohm output

 

SDI: 

BNC

 

AUX: 

BNC

Camera, pan-tilt head control: 

RJ45, RS-4, pan-tilt head control signal output

 

RP 

 Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),  
max. 81 ft (1000 meters)

Functions/performance: 

 Maximum weight capacity: .1 lbs (15 kg) 
Tilt range: 00 degrees (approx. ±150 degrees) 
    The tilt range is subject to restrictions depending on the cable and lens of camera to be 

mounted on pan-tilt head.

 

 

 Pan range: 00 degrees (approx. ±150 degrees) 
Maximum operating speed: 45 degrees/sec.  
   ( when the center of gravity of the units installed on the pan-tilt head has been aligned with 

the head’s center of rotation)

 

 

   (Maximum operating speed with prompter mounted: 15 degrees/sec.)

 

 

 Stop accuracy: ±´ 
Noise level: Less than NC5 (at less than 0 degrees/sec.)

Ambient operating temperature:  °F to 11°F (–5°C to +45°C)

Storage temperature: 

–4°F to 149°F (–0°C to +65°C)

Ambient operating humidity: 

0% to 90% (no condensation)

Dimensions (WHD): 

1-9/16”16-/8”6-5/8” (19416168 mm)

Weight: 

Approx.  lbs (10 kg)

Finish: 

AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)

Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.

Supply voltage: 

AC 10 V, 60 Hz

Power consumption:  10 W

 indicates safety information.