Panasonic AW-PH650N User Manual
12
Parts and their functions
Supplied cable unit
24P round water-proof plug (male)
Connect this to the multi connector [MULTI] on the main
unit.
unit.
RJ-45 modular plug
Connect this to pan/tilt head controller.
It can be extended up to 3281 ft. (1000 m).
To extend the connection, use a relay adapter purchased
on the market and use a 10BASE-T straight cable (UTP
category 5) for the extension.
It can be extended up to 3281 ft. (1000 m).
To extend the connection, use a relay adapter purchased
on the market and use a 10BASE-T straight cable (UTP
category 5) for the extension.
VIDEO OUT BNC jack
This is the output connector for the camera’s video
signals.
Use a BNC coaxial cable for the connecting cable.
signals.
Use a BNC coaxial cable for the connecting cable.
Y OUT BNC jack
This is the output connector for the camera’s video
signals.
Use a BNC coaxial cable for the connecting cable.
signals.
Use a BNC coaxial cable for the connecting cable.
Pr OUT BNC jack
This is the output connector for the camera’s video
signals.
Use a BNC coaxial cable for the connecting cable.
signals.
Use a BNC coaxial cable for the connecting cable.
Pb OUT BNC jack
This is the output connector for the camera’s video
signals.
Use a BNC coaxial cable for the connecting cable.
signals.
Use a BNC coaxial cable for the connecting cable.
G/L IN BNC jack
This is the gen-lock signal input jack.
Use a BNC coaxial cable for the connecting cable.
Use a BNC coaxial cable for the connecting cable.
D-SUB 15P connector (male)
Connect the controller used for the multi purpose camera
to this connector. When connecting it directly, remove the
stud prior to use.
to this connector. When connecting it directly, remove the
stud prior to use.
Pin No.
Signal name
1
– – –
9
– – –
2
– – –
10
– – –
3
– – –
11
– – –
4
– – –
12
GND
5
– – –
13
TXD (C)
6
– – –
14
RXD (H)
7
TXD (H)
15
RXD (C)
8
– – –
<Multi cable> (VEEB0133)