Panasonic AW-PH650N User Manual

6

Precautions for installation

   Do not install this unit by suspending it, and do not install 

it on its side.

   Using the four pan/tilt head mounting holes, fasten the 

unit securely with bolts which are long enough.

    The mounting holes have a diameter of 3/8” (10 mm). Use 

sufficiently long bolts with an 5/16” (8 mm) diameter. Do 
not use bolts with a diameter smaller than 5/16” (8 mm). 
Use hexagon head bolts or hexagon socket head bolts, 
for instance, which can be tightened up securely using a 
tool and which are made of a material and with a finish 
that will withstand outdoor use.

   Be absolutely sure to use parts such as flat washers or 

spring washers together with the bolts to prevent the bolts 
from coming loose.

How to install

    Attach one end of the anti-fall wire to the mounting hole, 

and secure the other end to the mounting base or other 
sturdy place. 
The diameter of the hole where the anti-fall wire is 
attached is 6.5 mm. Attach the wire using the anti-fall wire 
mounting bolts with a 6 mm diameter and a length of 16 
mm, flat washers, spring washers and nuts.

   Ensure that the anti-fall wire is strong enough to bear the 

weight of the entire pan/tilt head (head, housing, camera 
and cable).