Mellerware 2650DA User Manual

ance, this will increase the risk of electric shock.

20. Do not touch the plug with wet hands.

21. Take the necessary measures to avoid starting 

the appliance involuntarily.

22. Do not touch any of the appliance’s moving 

parts while it is operating.

1.  Fully unroll the appliance’s power cable before 

each use.

2.  Do not use the appliance if its accessories are 

not properly fitted.

3.  Do not use the appliance if the accessories 

attached to it are defective. Replace them im-

mediately.

4.  Do not use the appliance if the on/off switch 

does not work.

5.  Do not move the appliance while in use.

6.  Do not use the appliance if it is tipped up and 

do not turn it over.

7.  Do not force the appliance’s work capacity.

8.  This appliance is for household use only, not 

professional or industrial use.

9.  This appliance should be stored out of reach of 

children and/or the disabled.

10. Do not store the appliance on areas where the 

temperature could be lower than 2ºC.

11. Do not expose to extreme temperatures or 

strong magnetism.

12. Keep the appliance in a dry, dust-free place, out 

of direct sunlight.

13. Make sure that dust, dirt or other foreign objects 

do not block the fan grill on the appliance.

14. Keep the appliance in good condition. Check 

that the moving parts are not misaligned or 

locked and make sure there are no broken 

parts or anomalies that may prevent the appli-

ance from operating correctly.

15. Never leave the appliance unattended while in 

use.

16. Never leave the appliance connected and unat-

tended if is not in use. This saves energy and 

prolongs the life of the appliance.

17. Do not use the appliance for more than 10 min-

utes at once. Let it cool for down for a couple of 

minutes before using again.

• Make sure that the appliance is serviced only by 

specialist personnel, and that only original spare 

parts or accessories are used to replace existing 

parts/ accessories.

• Any misuse or failure to follow the instructions 

for use renders the guarantee and the manufac-

turer’s liability null and void.

• Make sure that all the product’s packaging has 

been removed.

• Before using the product for the first time, clean 

the parts that will come into contact with food in 

the manner described in the cleaning section.

• Prepare the appliance according to the function 

you wish to use.

1.  Take the length of cable required out of the 

housing.

2.  Connect the appliance to the mains.

3.  The LED display will light up, displaying 00:00

4.  Press gently with your hand on the upper part 

while pressing the connect/ disconnect button 

to raise the upper part (Fig. 1)

5.  Place the bowl on base and position as shown 

(Fig. 2)

6.  Place the accessory that will be used on the 

mounting, ensuring that it fits over the hole 

and turn in an anti-clockwise direction until it is 

tightly fitted (Fig. 3)

7.  Press the connect/disconnect button and press 

the upper part downwards until the button is 

returned to its original position (Fig. 4)

8.  Put the lid on to prevent splashing.

9.  Start the appliance by turning on the speed 

regulator.

10. If no specific operating time has been pro-

grammed, the LED display will show the time 

that has elapsed since the operating speed 

was selected.

11. To avoid a fierce start up of the fan, it is advis-

able to start off from the lowest speed posi-

tion and, once the fan has been switched on, 

progressively increase the speed to the desired 

position.