Breville BEK5 User Manual
4
OPERATING YOUR BREVILLE EZY CARVE
BEFORE FIRST USE
Remove all promotional labels and wash the
stainless steel blades in warm, soapy water.
Dry thoroughly.
stainless steel blades in warm, soapy water.
Dry thoroughly.
1. Interlock the blades together before
inserting into the appliance. To assemble
blades, hold the shaft ends below the
Safety Guards and slip the rivet on the tip
of the other blade (see fig 1). Move
blades together ensuring tips remain
together.
blades, hold the shaft ends below the
Safety Guards and slip the rivet on the tip
of the other blade (see fig 1). Move
blades together ensuring tips remain
together.
2. Hold assembled blades by the Safety
Guards and insert and slide blades into
the blade slot pushing until both blades
are locked into position. You will hear a
‘click’ sound (see fig 2).
the blade slot pushing until both blades
are locked into position. You will hear a
‘click’ sound (see fig 2).
3. Insert the plug into a 230/240v power
outlet and switch on. Ensure the cord is
clear from the blades.
clear from the blades.
4. Holding the knife with one hand, depress
both the top and bottom ON/OFF
controls to activate the knife. The unit will
not operate unless both controls are
depressed at the same time (see fig 3).
Releasing either of the ON/OFF controls
will automatically stop the knife.
controls to activate the knife. The unit will
not operate unless both controls are
depressed at the same time (see fig 3).
Releasing either of the ON/OFF controls
will automatically stop the knife.
3
KNOW YOUR BREVILLE EZY CARVE
1. Twin Stainless steel blades
2. 150 watts of power
3. Blade release buttons
4. Dual safety switch ON/OFF buttons
5. Built-in loop for storage
6. Blade safety guards
Always use both blades
when operating the
Ezy Carve.
when operating the
Ezy Carve.
☛
NOTE!
Always ensure blades are
fully locked into position
before operating.
fully locked into position
before operating.
☛
NOTE!
Fig 1
Fig 2
Fig 3
1.
2.
4.
3.
5.
6.