Berkel PM20 User Manual

• Turn the timer to “hold” position, shift to the desired speed and then move the start toggle button.

• Transmission adjustment may be necessary.  Contact your nearest Designated Berkel Service

Location.

Overload circuit breaker tripped
• Mixer is overloaded causing the circuit breaker to trip.  See the Product Capacity Chart on page

13.

Mixer slips out of gear under load

• Make sure the shift lever is adequately engaged.

• If mixer shift lever is adequately engaged and slipping still exists, then contact your nearest

Designated Berkel Service Location

Product not being properly mixed at the bottom of the bowl

• Inadequate water to product ratio (AR)

• Excessive clearance at the bottom of the bowl and attachment. Contact your nearest Designated

Berkel Service Location.

R

Please contact your nearest Designated Berkel Service Location for any repair parts and/or

repair service required on your Berkel slicer.  A list of DBSL’s can be found on the website at

www.berkel.com

.  Pull down the service tab and then click on your start for the nearest DBSL.

Additional information may be obtained from:

Technical Service Support Center
Berkel Company
4406 Technology Drive
South Bend, IN 46628-9700
(574) 232-8222
(800) 348-0251