Epson II+ User Manual

Type the number of the item you wish to add and press 

can add

as many devices as necessary. When the DEVICE LIST is complete, press 0
followed by 

Note: Even if you have both monochrome and color monitor video cards

installed, you can only test the monitor that is currently selected.

You select the monitor either with the monitor switch on the front

panel or a DIP switch inside the main unit.

To remove a device from the list, press 2 and 

The screen displays

the current DEVICE LIST and the prompt:

Enter the number of the item to delete:

Type the number of the item you wish to delete and press 

can

delete as many devices as necessary.

When the DEVICE LIST is correct, press 0 and then 

The screen

displays the modified DEVICE LIST for a final check. If the list is correct,

press Y and 

You are now ready to select a test.

From the DEVICE LIST, select the device you wish to test. Type the

number of the device, then press 

Before the test begins, you are asked how many times to perform the

test. You see this menu:

Number of 

times to test device

1

- Run test one time

2 - Run test multiple times
0 - Exit

Enter selection number:

You can specify that the test be performed one time only or any number

of times in the range from 1 to 9999. Running a test multiple times is for

4-4