Electrolux 9CHG584138 User Manual

Page 12

62.9680.01_UL

Pasta Cooker overheats; 
the power is too weak.

• Water level too low.

- Top up with water.

Flame smokes.

• Gas mix too rich.
• Partially blocked burner 

gaps.

- Inform Customer 

Service.

Long yellow flame tips

• Mixing tube narrowed by 

dirt.

- Inform Customer 

Service.

Flame lifts off.

• Exit velocity too high due 

to blocked burner gaps.

• Pressure regulator on 

gas cylinder not 
operating correctly.

- Inform Customer 

Service.

Flame flashes back.

• Mixture too lean.
• Insufficient exit velocityat 

burner gaps.

• Soiled airways
• Blocked nozzle.

- Inform Customer 

Service.

No flame or flame too 
small.

• Blocked nozzle or mixer 

tube

• Blocked gas tap.
• No gas.
• Insufficient gas 

pressure.

- Inform Customer 

Service.

- Check gas tap setting.

No flame at low setting.

• Blocked low setting 

nozzle.

- Inform Customer 

Service.

No flame.

• Blocked burner gaps.
• Blocked nozzle.

- Clean pilot burner cap.

Flame goes out after 
control valve release.

• Thermo-element 

insufficiently heated 
(dirty?)

• Defective thermo-

element

• Defective pilot burner

- Remove dirt; do not use 

abrasive paper!

- Inform Customer 

Service.

Flame too small or too 
large.

• Primary air ratio 

adjusted.

• Nozzle blocked.

- Inform Customer 

Service.