Q-See QSDR74RTS User Manual
Q-See is a registered trademark of Digital Peripheral Solutions, Inc.
Digital Peripheral Solutions, Inc.
8015 East Crystal Drive,
Anaheim, CA 92807
www.Q-See.com
3
Enjoy
This Q-See product has undergone extensive quality control. If you have
any issues during the setup process, please contact our support department
before returning the product.
We have your solution!
1) Need assistance setting up the remote monitoring feature with your Q-See
DVR? Visit www.portforward.com/qsee
2) Visit our Q-See Support Section at www. Q-See.com for instant
troubleshooting tips, FAQs, DVR firmware downloads, Live Chat and More.
3) Contact our Support Team:
DVR? Visit www.portforward.com/qsee
2) Visit our Q-See Support Section at www. Q-See.com for instant
troubleshooting tips, FAQs, DVR firmware downloads, Live Chat and More.
3) Contact our Support Team:
On the Web: (24/7) Visit the Technical Support Section
www.Q-See.com
By Phone (Monday thru Friday, 9am-5pm (PST)
Tech Support 1 (877) 998 3440, ext 539
Customer Service 1 (877) 998 3440 ext. 538
Tech Support 1 (877) 998 3440, ext 539
Customer Service 1 (877) 998 3440 ext. 538
By Email:
ts@dpsi-usa.com
ts@dpsi-usa.com
@
CONGRATULATIONS
on your purchase!
D
NetViewer Interface:
Page 7
Trouble Shooting Connecting:
Anti-virus programs, fire walls, and other plug-ins could be blocking the Active X Control.
Close them and try to connect. For more advanced instructions or for trouble-shooting, please
consult the Q-SEE User Manual which came with your unit, or download the manual from our
support section at www.Q-See.com. You can also contact our Technical Support department.
If you have a router plugged into another router, for example, if you have the DVR attached to
a router which is attached to a DSL or Cable router, you may need to forward port 80 and 9000
(or whatever port you are using) on the DSL or Cable router to the IP address of the router that
the DVR is attached to, so that router can then forward the port to the DVR. Please refer to the
PORT FORWARDING section (Page 4) on how to get instructions on forwarding the port on
the other router.
Anti-virus programs, fire walls, and other plug-ins could be blocking the Active X Control.
Close them and try to connect. For more advanced instructions or for trouble-shooting, please
consult the Q-SEE User Manual which came with your unit, or download the manual from our
support section at www.Q-See.com. You can also contact our Technical Support department.
If you have a router plugged into another router, for example, if you have the DVR attached to
a router which is attached to a DSL or Cable router, you may need to forward port 80 and 9000
(or whatever port you are using) on the DSL or Cable router to the IP address of the router that
the DVR is attached to, so that router can then forward the port to the DVR. Please refer to the
PORT FORWARDING section (Page 4) on how to get instructions on forwarding the port on
the other router.
1) Live, Replay, and Setup options
2) PTZ Controls
3) PTZ Setup
4) Invoke PTZ settings.
5) Clear PTZ settings
6) Turn Live display on and off
7) Capture Screen Image
8) Remote Recording
9) Channel Display Mode (number of channels)
10) Volume Control
2) PTZ Controls
3) PTZ Setup
4) Invoke PTZ settings.
5) Clear PTZ settings
6) Turn Live display on and off
7) Capture Screen Image
8) Remote Recording
9) Channel Display Mode (number of channels)
10) Volume Control
For information on the features of, and how to use the remote viewing program,
refer to 6.3 Main Interface of NetViewer starting on page 31 of the Users Manual.
refer to 6.3 Main Interface of NetViewer starting on page 31 of the Users Manual.