Barco K5960008-03 User Manual
Barco - DCMS - User Manual _________________________________________________________ 45
Display connection and calibration options
7.4
MDPW476
Connection
The Barco MDPW476 display can be connected to the host by means of a 3-wire
The Barco MDPW476 display can be connected to the host by means of a 3-wire
crossed male-female cable (Rx-Tx, Tx-Rx, GND-GND). This cable is provided in
the DCMS package.
Calibration options
Figure 26: DCMS with MDPW476
The MDPW476 display supports all the functionality of DCMS. Mid gray
calibration is not needed as a full gray tracking is done. Gray tracking is done
with the help of high precision look-up tables (LUTs) embedded in the display
and programmed by DCMS. The MDPW is able to store up to 4 color calibration
settings that are also selectable via OSD menu (on-screen-display menu).
Before the calibration dialog is displayed, an MDPW specifics dialog is displayed
first. The progress bar below is colored blue while DCMS is retrieving this
information from the display and will color green as soon as this information is
available.