ADIC 601354 User Manual

601354 Rev A

Normal Operations

4-29

•

The target archive must be configured with the auto 
check-in and auto import options selected. If not, all the 
subject media are left in the load port and a failure message 
is logged and displayed at the Volume Server System 
console. 

•

The auto import destination media class (set up during 
archive configuration) must have a capacity low enough to 
allow addition of more media. Excess media are left in the 
load port and a failure message is logged and displayed at 
the Volume Server System console. 

Destination media class capacity - Fill level = Amount of media that can be entered

•

The receiving archive media class fill level must be low 
enough to allow addition of more media. Excess media are 
left in the load port and a failure message is logged and 
displayed at the Volume Server System console.

Archive media class capacity - Fill level = Amount of media that can be entered

All media can be classified as known or unknown. Unknown 
media were never introduced into a VolServ system or were 
removed using the Export Media command. Known media are 
contained in an archive, are checked out using the Check-out 
Media command, or are intransit to another archive as a result 
of a Move Media command, Mount Media command, or media 
migration. 

Two basic ways to reenter known media into an archive are: the 
Check-in Media command and the unsolicited enter and 
AutoEnter methods.