Pitco Frialator SGH50 Leaflet

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 

•

1

509 Route 3A, Bow NH 03304, USA

 

(603) 225-6684 

• Fax (603) 225-8472 •

 

 

CSA Certified

      (AGA, CGA)

 

NSF Listed

 

CE Certified

 

ENERGY STAR Qualified

Patent Pending

Project

Item No.

Quantity

Solid State Control

Drain Valve Interlock

Baskets (Twin Size)

Tube racks

Lift off basket hangers

Clean out rod

9" adjustable legs

Rear gas connection

Matchless ignition

Fryer cleaning brush

Stainless steel tank,
front, door and sides.

Digital controller
Intellifry computer
Filter drawer system with heat tape (for 2 or more
fryers)
Filter system heat tape (for use with solid shortening)
9" adjustable casters
Basket lifts
Stainless steel back
Stainless steel tank covers
Bread and Batter cabinet
Flush hose
Filter powder
Filter paper

Welded tank with an extra smooth peened finish ensures
easy cleaning.
Long-lasting, high-temperature alloy stainless steel heat
baffles are mounted in the heat exchanger tubes to
provide maximum heating and combustion efficiency.
High production/fast recovery fryer assembly available in
combinations of Full tank and Twin tank fryers.
When used with a filtration system, fryers are available in
combinations of two or more units.
Stainless steel front, door, side panels, and splashback.
Heavy duty 3/16” (.48 cm) door hinge.

Solid State controller maintains the fryer temperature
between 250°F (122°C) and 380°F (193°C). Soild State
controller has built-in melt cycle and boil-out capability.
Integrated gas control valve acts as a manual and pilot
valve, automatic pilot valve, gas filter, pressure regulator,
and automatic main valve.
Gas control valve prevents gas flow to the main burner
until pilot is established and shuts off all gas flow
automatically if the pilot flame goes out.
Temperature limit switch safely shuts off all gas flow if
the fryer temperature exceeds the upper limit.
New Solstice burner/baffle design.***
-Increases cooking production.
-Lowers flue temperature.
-Improves working environment.
-Generates more production per BTU.
***Compared to previous models.

OPTIONAL FILTER SYSTEM
(Available on 2 or more units)

Filter drawer glides on self aligning roller-less guides
1-1/4” NPT drain valve for quick draining on both full and

twin tanks.

Easy to remove filter unit for fast cleaning and paper

replacement.

Filter piping integrated into the fryer for no-hassle
filtering.
Extra large 3” drain manifold to prevent clogging.

L10-151 Rev 2 (05/03)

(shown with optional casters and filtration system)