Vulcan-Hart GRD65F ML-126738 User Manual

– 3 –

The KleenScreen Filtration System filters the oil as it is pumped back to its respective tank. Valves
inside the doors under each fry tank must be set so only one tank is being drained, filtered and pumped
back at any one time.

The KleenScreen Filtration System is used on the following Vulcan Fryer Models:

GR35F

GRD35F

GRC35F

ERD50F

ERC50F

GR45F

GRD45F

GRC45F

ERD85F

ERC85F

GR65F

GRD65F

GRC65F

GR85F

GRD85F

GRC85F

1. After unpacking, wash the filter tank, crumb basket and filter screen. Use dishwashing detergent

and warm water, or clean the components in a dishwasher.  Rinse the filter tank, crumb basket
and filter screen thoroughly.  Wipe components dry with a clean cloth.

2. Pull the filter drawer out.

3. Place the filter tank in the filter drawer. Hang the crumb basket from the left tank handle inside

the filter tank (Figs. 1 and 2).  Position the filter screen assembly flat on the bottom of the filter
tank so the filter orifice underneath the screen fits the suction hole in the bottom of the tank (Figs.
1 and 2).  Close the drawer.

4. Make sure the two O-Rings are in place inside the filter suction port (Figs. 1 and 2). As the drawer

is closed, make sure the filter suction connector fits tightly into the filter suction port (Figs. 1 and 2).