Hoshizaki C-101BAH User Manual
29
B. Startup
WARNING
All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
performance, component life, and warranty coverage.
NOTICE
• If the appliance is turned off, wait for at least 3 minutes before restarting the
appliance to prevent damage to the compressor.
• At startup, confirm that all internal and external connections are free of leaks.
1) Open the water supply line shut-off valve.
2) Make sure the control switch is in the "OFF" position. Plug the appliance into the
2) Make sure the control switch is in the "OFF" position. Plug the appliance into the
electrical outlet.
WARNING! To reduce the risk of electric shock, do not touch the
control switch or plug with damp hands.
If you have to slide the appliance back
for a built-in installation, make sure you do not damage or pinch the water supply
line, drain line, or power cord.
line, drain line, or power cord.
3) If required by sanitation code in your area, seal the perimeter where the appliance
touches the floor with approved caulk compound in a smooth and easily cleanable
manner.
manner.
4) Move the control switch to the "ICE" position to start the automatic icemaking process.
5) Once the appliance starts to produce ice, allow it to run for another 30 minutes.
6) Move the control switch to the "OFF" position.
7) Remove the ice produced, then clean the storage bin liner, door liner, and door gasket
5) Once the appliance starts to produce ice, allow it to run for another 30 minutes.
6) Move the control switch to the "OFF" position.
7) Remove the ice produced, then clean the storage bin liner, door liner, and door gasket
using a neutral cleaner. Rinse thoroughly after cleaning.
8) Move the control switch to the "ICE" position to start the automatic icemaking process.
9) To confirm bin control operation, hold ice in contact with the bin control thermostat bulb.
9) To confirm bin control operation, hold ice in contact with the bin control thermostat bulb.
If the icemaker does not stop within 10 seconds, the bin control thermostat must be
adjusted. Installations at higher altitude locations are more likely to require adjustment.
adjusted. Installations at higher altitude locations are more likely to require adjustment.