Summit AL-652B Instruction Manual
Noise
Cooling in refrigerating-freezing appliances is enabled by the refrigerating system
with the compressor, this produces noise. How noisy the appliance is depends on
where it is placed, how it’s used and how old the appliance is.
with the compressor, this produces noise. How noisy the appliance is depends on
where it is placed, how it’s used and how old the appliance is.
•
During the operation of the compressor, a liquid noise is heard and when
the compressor is not operating a refrigerant flow is heard. This is a
normal condition and it has no influence whatsoever on the lifetime of the
appliance.
the compressor is not operating a refrigerant flow is heard. This is a
normal condition and it has no influence whatsoever on the lifetime of the
appliance.
•
After starting the appliance, the operation of the compressor and the
refrigerant flow may be louder and this does not mean something is wrong
with the appliance. The noise will reduce gradually, this will not affect
the lifetime of the appliance.
refrigerant flow may be louder and this does not mean something is wrong
with the appliance. The noise will reduce gradually, this will not affect
the lifetime of the appliance.
•
Sometimes unusual and strong noises occur which is rather unusual for the
appliance. This noise is often a consequence of inadequate placing. To
avoid the noise make sure the appliance is placed and leveled firmly on a
solid base. Make sure the appliance is not touching the wall or kitchen
units standing next to it. And always make sure you check the accessories
in the interior of the appliance; they should be placed correctly in their
positions. Check the bottles, tins and other vessels that might touch each
other and rattle.
appliance. This noise is often a consequence of inadequate placing. To
avoid the noise make sure the appliance is placed and leveled firmly on a
solid base. Make sure the appliance is not touching the wall or kitchen
units standing next to it. And always make sure you check the accessories
in the interior of the appliance; they should be placed correctly in their
positions. Check the bottles, tins and other vessels that might touch each
other and rattle.
Bulb Replacement
Before replacing the light bulb, disconnect the appliance from the power supply.
Press the cover at the rear side (in the arrow 1 direction) and remove the plastic
cover (in the arrow 2 direction). Replace the bulb with a new one (E14, max.
10W). Don’t forget the old bulb does not belong to organic waste.
Light bulb is consuming good therefore our in-guarantee service does not
relate to it.
Before replacing the light bulb, disconnect the appliance from the power supply.
Press the cover at the rear side (in the arrow 1 direction) and remove the plastic
cover (in the arrow 2 direction). Replace the bulb with a new one (E14, max.
10W). Don’t forget the old bulb does not belong to organic waste.
Light bulb is consuming good therefore our in-guarantee service does not
relate to it.
Specifications are Subject to Change Without
Notice.
Instructions for Use