Panasonic NC-EH22P User Manual

20

Before cleaning, be sure to disconnect the plug from 
outlet, dispense water and allow to cool the unit.

●

 

Do not wet or soak the main unit in water.

 

  If water enters the main unit from the bottom or from the dispensing  

 

  spout, it can also get into the electrical components in the main unit  

 

  and may cause a malfunction.

●

 

Do not use detergents. 

●

 

Do not use benzine or thinner.

 

(They may leave an odor.) 

  (They may damage the surface.)

●

 

Do not use polishing

 

powder, a scrub brush

 

or a nylon brush.

 

  They may damage the fluororesin

 

  finish of the inner container.

 

About "Scale"
While you are using this unit, minerals 
contained in the water (like calcium) can get 
stuck on the inner comtainer or on the mesh 
filter. This is called "scale", and it is harmless.

●

 

Milky-white gritty surface (caused by calcium)

●

 

White or glittering floating material

  (crystals of minerals)

●

 

Discoloration in the finish like dark brown,    

  gray, or green areas
  (metallic ion made on the fluororesin covering)

These are not discoloration or corrosion of 
the inner container itself, nor are they flakes 
from the fluororesin covering.

When filter is clogged, water does not flow
smoothly.
*  After cleaning the filter, be sure to 
 

reattach it to the inner container.

● 

Dry it thoroughly.

● 

Put it into a plastic bag and seal the bag.

Operating NC-EH40_EN.indd   20

11/7/07   3:57:51 PM