Samsung BF641 Series User Manual

EN

This oven may be installed only by an approved electrician. The installer is responsible for 

connecting the appliance to the mains and in so doing for observing the relevant safety 

regulations.
●  Ensure protection from live parts when installing the oven.

●  The kitchen cabinet in which the oven is built in must satisfy stability requirements as 

specified in DIN 68930.

Input voltage / frequency
Volume (usable capacity) 
Output rating 
Net weight 
Weight with packaging 
Housing (W x H x D) 
Oven interior (W x H x D) 

240 V ~ 50 Hz
65 ℓ
max. 3600 W
approx. 33 kg
approx. 38 kg
595 x 595 x 566 mm
440 x 365 x 405 mm

If the appliance is not connected to the mains with a plug, 

a multi-pole isolator switch (with at least 3 mm contact 

spacing) must be provided in order to satisfy safety 

regulations. The power cable (H05 RR-F or H05 VV-F, min. 

1.5 m, 1.5 ~ 2.5 mm²) must be of sufficient length to be 

connected to the oven, even if the oven stands on the floor 

in front of its built-in cabinet. Open the rear connection 

cover of the oven with a screwdriver and loosen the screws 

of the cable clamp before you connect the power lines to 

the relevant connection terminals. The oven is earthed 

via the (   )-terminal. If the oven is connected to the 

mains with a plug, this plug must remain accessible after 

the oven is installed. Samsung will take no responsibility 

for accidents that originate from a missing or faulty earth 

connection.

This is a built-in oven, which 

needs to be installed into an 

upper or lower cabinet.
●  Observe minimum distances.

●  Fix oven on both sides using 

screws

After installation, remove the vinyl 

protective film from the door to 

the appliance and the protective 

film from the interior surfaces of 

the oven.

���

���

���

���

���

��

min. 550

min. 560

min. 590 

max. 600

min. 50

Upper Cabinet

Lower Cabinet

min. 550

min. 600

min. 560

min. 50

BF641-Series_XSA-00157J_EN.indd   4

2008-04-21   ｿﾀﾈﾄ 2:07:04