Smeg ALFA135V6 User Manual
Instructions for the Installer
24
2. INSTALLING THE OVEN
The oven is designed for free-standing installation on a horizontal work-
top. It must be far enough from the wall behind it to allow easy access to
top. It must be far enough from the wall behind it to allow easy access to
the terminal board for connection of the power supply lead. Installation
must be carried out by a
must be carried out by a
qualified engineer in compliance with the
relevant EEC DIRECTIVES.
2.1 Electrical connection
Check that the power supply voltage and size are as specified on the
nameplate on the back of the oven. This nameplate must never be
removed.
nameplate on the back of the oven. This nameplate must never be
removed.
The oven is fitted with a H07RN-
F three-core cable for operation
at 240-240V
F three-core cable for operation
at 240-240V
∼
.
For operation at 380-415V2N
∼
or
380-415V3N
∼
, the power supply
cable has to be replaced and the
connection to the terminal board
modified. The terminal board can
be accessed by removing the
panel on the back of the oven.
connection to the terminal board
modified. The terminal board can
be accessed by removing the
panel on the back of the oven.